Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 48 guías que incluyen este paso.

Inglés
Chino
Paso 20
Slide the lower left pick to the lower left corner to cut the adhesive on that corner. Leave the pick at the corner. Do not pry any farther, and do not remove the pick from the iPad. There are quite a few things to avoid beneath the lower bezel, so study the third image closely:
  • Slide the lower left pick to the lower left corner to cut the adhesive on that corner.

  • Leave the pick at the corner. Do not pry any farther, and do not remove the pick from the iPad.

  • There are quite a few things to avoid beneath the lower bezel, so study the third image closely:

  • Antennas

  • Home button cavity

  • Digitizer cable

  • The following steps will direct you where to pry to avoid damage to these components. Only apply heat and pry where directed.

滑动左下边的撬片来分边角处的离粘合剂。

滑动到左下角时停止滑动。 然后放置在此。

在下面板下面有很多东西需要规避,请仔细研究第三张图像:

天线

Home键

排线

接下来的步骤将会指导您如何避免伤害这些部件。 只加热和撬动指南所指示的部位。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.