Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 5 guías que incluyen este paso.

Inglés
Italiano
Paso 6
Pry up the front panel along the right edge using the method described in previous steps. Eventually work around the entire perimeter of the front panel until it is lifted slightly from the rear panel. Also, ensure that the plastic surround is separated from the clips in the rear panel.
  • Pry up the front panel along the right edge using the method described in previous steps.

  • Eventually work around the entire perimeter of the front panel until it is lifted slightly from the rear panel.

  • Also, ensure that the plastic surround is separated from the clips in the rear panel.

Fai leva sul vetro anteriore lungo il bordo destro usando lo stesso metodo descritto nei passaggi precedenti.

Continua a lavorare attorno all'intero perimetro del vetro anteriore fino a sollevarlo leggermente dalla copertura posteriore.

Assicurati anche che la plastica che lo circonda si sia separata dai ganci nella copertura posteriore.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.