Saltar al contenido principal
Inglés
Español
Paso 10
After the motherboard assembly is out, the reset and power button covers can easily be removed. Unclipping a spring is all that's needed to remove the eject mechanism from the outer case. Ejecting a cartridge is accomplished by pushing two inclined planes underneath the cartridge until it pops up off the connector attached to the board.
  • After the motherboard assembly is out, the reset and power button covers can easily be removed.

  • Unclipping a spring is all that's needed to remove the eject mechanism from the outer case.

  • Ejecting a cartridge is accomplished by pushing two inclined planes underneath the cartridge until it pops up off the connector attached to the board.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.