Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.

Inglés
Chino
Paso 8
Slowly and gently lift the top edge of the front panel assembly away from the steel inner frame. Continue to rotate the front panel assembly away from the steel inner frame until it slowly begins to peel off the adhesive applied below the home button area.
  • Slowly and gently lift the top edge of the front panel assembly away from the steel inner frame.

  • Continue to rotate the front panel assembly away from the steel inner frame until it slowly begins to peel off the adhesive applied below the home button area.

  • It may be easiest to insert a spudger at the top and work it around the edges, spreading gently as you go.

  • Carefully pull the lower edge of the front panel assembly away from the steel inner frame.

  • Be careful, if the home button sticks to the front panel you may tear the home button cable.

  • Do not pull the front glass completely away from the frame. Doing so may result In damage to the digitizer cable.

  • If the glass is cracked (which it probably is since you're replacing it) removing the panel is likely to cause it to bend, kicking off small shards of glass. Before you do this step, cover the front with clear tape, then perform the actual removal over a trash can. Protective eyewear would also be prudent.

小心缓慢的将前面板从中框上抬起。

从home键位置缓慢的继续将前面板从中框中抬起

这有可能会需要在顶部插入一个撬棒来撬动周围的卡扣。

小心的将前面板与中框分离。

小心,如果home键与前面板黏连可能会损伤它的排线。

请勿完全将面板与框架分离,这有可能会导致显示排线受损。

如果玻璃面板破裂(这有可能是你需要更换它),这很容易使得玻璃面板弯曲、破碎成很小且锋利的碎片所以在执行本步骤前请使用胶带来盖住整个玻璃面板,然后将其扔掉。 同时需要佩戴防护眼镜。

[* black] Slowly and gently lift the top edge of the front panel assembly away from the steel inner frame.
[* black] Continue to rotate the front panel assembly away from the steel inner frame until it slowly begins to peel off the adhesive applied below the home button area.
[* black] It may be easiest to insert a spudger at the top and work it around the edges, spreading gently as you go.
[* black] Carefully pull the lower edge of the front panel assembly away from the steel inner frame.
[* icon_caution] Be careful, if the home button sticks to the front panel you may tear the home button cable.
[* icon_caution] Do not flippull the front glass completely away from the frame. Doing so may result In damage to the digitizer cable.
[* icon_caution] Do not flippull the front glass completely away from the frame. Doing so may result In damage to the digitizer cable.
[* icon_caution] If the glass is cracked (which it probably is since you're replacing it) removing the panel is likely to cause it to bend, kicking off small shards of glass. Before you do this step, cover the front with clear tape, then perform the actual removal over a trash can. Protective eyewear would also be prudent.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.