Saltar al contenido principal
Inglés
Español

Traduciendo paso 7

Paso 7
Slide the rubber cover off the microphone attached to the old dock connector and transfer it to your new dock connector.
  • Slide the rubber cover off the microphone attached to the old dock connector and transfer it to your new dock connector.

  • The ribbon is very fragile and can easily be torn when placing the rubber cover onto your new part.

  • If your microphone does not work after replacing your dock connector, the issue may be that the rubber cover is not positioned properly on the mic cable.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.