Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Inglés
Español

Traduciendo paso 8

Paso 8
Using the soldering iron, de-solder the various wires from the front and back of the circuit board. There are three pairs of wires on the front side, along with a set of 7 leads for the main circuit board connector.
Detach the Wires
  • Using the soldering iron, de-solder the various wires from the front and back of the circuit board.

  • There are three pairs of wires on the front side, along with a set of 7 leads for the main circuit board connector.

  • On the back side, there is a set of 9 leads for the microSD card connector.

  • Check out This Guide for tips on soldering and de-soldering.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.