Saltar al contenido principal
Inglés
Chino

Traduciendo paso 5

Paso 5
The rear housing should look like the picture on the left. The speaker part is at the top. Use a small bit (like a paperclip) to lift the speaker out of it's socket. It's glued in it's place, so you may need to use a bit of force.
  • The rear housing should look like the picture on the left. The speaker part is at the top.

  • Use a small bit (like a paperclip) to lift the speaker out of it's socket. It's glued in it's place, so you may need to use a bit of force.

  • Be sure not to touch any part of the speaker except the black plastic parts.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.