Traducir paso # 2 - Texas Instruments TI-92 Screen Cover Replacement - iFixit

Cancelar

Volver a la Guía

Inglés

Español

Paso anterior Siguiente paso

Traduciendo paso 2

Paso 2

Start to remove the strips by pulling them outward carefully. Lift one end of the strip and peel it down to the other end.

If the strips are sticking to each other you do not need to separate them from each other, simply continue pulling outward on the strips around the edges.

If the strips are sticking to each other you do not need to separate them from each other, simply continue pulling outward on the strips around the edges.

Start to remove the strips by pulling them outward carefully. Lift one end of the strip and peel it down to the other end.
If the strips are sticking to each other you do not need to separate them from each other, simply continue pulling outward on the strips around the edges.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.