Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Aviso: Estás editando un prerrequisito para la guía que estabas viendo hace poco. Cualquier cambio que realices afectará todas las 36 guías que incluyan este paso.

Inglés
Francés
Paso 2
Remove the following 3 screws from the rear wall of the battery compartment:
  • Remove the following 3 screws from the rear wall of the battery compartment:

  • Two 3 mm Phillips #00. (A1181 has three 3 mm screws and one 4 mm.)

  • One 4 mm Phillips #00 on the right side.

  • When reinstalling these screws, press gently on the lower case to line up the screw holes.

  • These screws easily strip, so be careful while taking these particular screws out.

Retirez les 3 vis suivantes de la paroi arrière du compartiment de la batterie :

Deux vis cruciformes #00 3 mm (A1181 a trois vis de 3 mm et une de 4 mm.)

Une vis cruciforme #00 de 4 mm du côté droit.

Quand vous revissez ces vis, appuyez doucement sur le boîtier inférieur pour aligner les trous des vis.

[* black] Remove the following 3 screws from the rear wall of the battery compartment:
[* red] Two 3 mm Phillips #00. (A1181 has three 3 mm screws and one 4 mm.)
[* orange] One 4 mm Phillips #00 on the right side.
[* icon_reminder] When reinstalling these screws, press gently on the lower case to line up the screw holes.
[* icon_note] These screws easily strip, so be careful while taking these particular screws out.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.