Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 24 guías que incluyen este paso.

Inglés
Japonés

Traduciendo paso 1

Paso 1
The next few steps bring your hands close to the exposed face of the power supply. Do not touch the face of the power supply or any of the exposed solder. Touching it risks a high voltage shock from the many large capacitors attached to the board. Use the tip of a spudger to push each side of the power button cable connector and gently walk it out of its socket. Use the tip of a spudger to push each side of the power button cable connector and gently walk it out of its socket.
  • The next few steps bring your hands close to the exposed face of the power supply. Do not touch the face of the power supply or any of the exposed solder. Touching it risks a high voltage shock from the many large capacitors attached to the board.

  • Use the tip of a spudger to push each side of the power button cable connector and gently walk it out of its socket.

次の2~3の手順では、作業の手が露出したパワーサプライの表面周辺に近づきます。露出した半田付け部分やパワーサプライの表面に触らないでください。ロジックボードに繋がっているボードに取り付けられた多数の大容量コンデンサから高電圧ショックが発生する危険性があります。

スパッジャーの先端を使って、パワーボタンケーブルコネクタの両側を抑えて、丁寧にソケットから外します。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.