Saltar al contenido principal
Inglés
Español
Paso 20
The heatsink is attached to the logic board by these screws. The large dual ribbon cable for the printhead attaches to two connectors on the logic board, one on each side. The large dual ribbon cable for the printhead attaches to two connectors on the logic board, one on each side.
  • The heatsink is attached to the logic board by these screws.

  • The large dual ribbon cable for the printhead attaches to two connectors on the logic board, one on each side.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.