Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a la guía que incluye este paso.

Inglés
Español

Traduciendo paso 5

Paso 5
Tilt the display backwards. Grip the display from its base to reduce torque. Use a spudger to pry the upper part of the back panel by pushing in the tabs located along its length. This step is particularly tricky during reassembly, as the plastic must be perfectly aligned or it will not snap in. If it does not snap in correctly, the screen won't fit properly.
  • Tilt the display backwards. Grip the display from its base to reduce torque.

  • Use a spudger to pry the upper part of the back panel by pushing in the tabs located along its length.

  • This step is particularly tricky during reassembly, as the plastic must be perfectly aligned or it will not snap in. If it does not snap in correctly, the screen won't fit properly.

  • Carefully lift the display free of the case.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.