Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 426 guías que incluyen este paso.

Inglés
Chino
Paso 2
Heat the iOpener for thirty seconds.
  • Heat the iOpener for thirty seconds.

  • Throughout the repair procedure, as the iOpener cools, reheat it in the microwave for an additional thirty seconds at a time.

  • Be careful not to overheat the iOpener during the repair. Overheating may cause the iOpener to burst.

  • Never touch the iOpener if it appears swollen.

  • If the iOpener is still too hot in the middle to touch, continue using it while waiting for it to cool down some more before reheating. A properly heated iOpener should stay warm for up to 10 minutes.

加热iOpener三十秒

在整个维修过程中,如果iOpener 冷却了,在微波炉中每次重新加热额外的三十秒。

注意在维修过程中不要过度加热iOpener,过热可能会导致iOpener爆炸。

如果iOpener过热膨胀,千万不要触碰iOpener。

如果iOpener中间部分依然烫的没法碰,请等待冷却后再使用,加热好的iOpener 应该可以保持热度十分钟

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.