Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Inglés
Chino
Paso 2
Sometimes you'll find a ribbon cable that simply pulls out of its socket, with no locking flap. The ribbon is normally sturdier than those used with ZIF connectors and the end is often  reinforced with a stiff plastic film.
No-Fuss Ribbon Cable Connectors
  • Sometimes you'll find a ribbon cable that simply pulls out of its socket, with no locking flap. The ribbon is normally sturdier than those used with ZIF connectors and the end is often reinforced with a stiff plastic film.

  • These connectors are often found on larger items such as printers, projectors and games consoles, such as this PS3 control board.

  • Before attempting to disconnect the ribbon, make quite sure this isn't a ZIF connector (previous step) with a release mechanism, otherwise you may damage the connector or the ribbon in forcibly removing it, and you won't be able to reinsert it.

  • To disconnect the cable, pull it straight out of the connector.

  • To reinstall the cable, hold it near the end and push it straight into the connector, being careful not to kink the cable. If you can, apply the force to the plastic reinforcement rather than the cable itself.

偶尔,你会发现一条丝带状电缆,你可以直接把它从它的插座拔出,并没有锁舌。

这些接头通常出现于较大的电子设备如打印机、投影仪或游戏主机,比如这台 PS3 控制板。

在尝试断开连接此线缆之前,务必确认这不是带释放机制的 ZIF 连接头(上一个步骤),否则你可能会在强行拔出时损坏连接头或线缆,并且你无法重新将其插入。

若要断开连接,直接将其从插座中拔出。

若要重新连接线缆,抓住线缆接近末端的位置并将其直接插入接头中。请勿缠绕线缆。如果可以,请在塑料外壳上施力,而不是线缆本身。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.