Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Inglés
Español
Paso 14
Now support the speedometer gauge face and the rest of the assembly on something soft that will protect it. Some foam was used in this case.
  • Now support the speedometer gauge face and the rest of the assembly on something soft that will protect it. Some foam was used in this case.

  • Then, using a hammer and small punch, tap out the shaft shown in the last step from the side with the small brass ring.

  • Press your finger against the gear end to keep the shaft from falling out. This shaft also acts to support the numbers. Without it they "droop" down and can also become out of alignment.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.