Traducir paso # 5 - Mac Pro First Generation Hard drives and hard drive carriers (Early 2008) - iFixit

Repara tus cosas

Derecho a reparar

Partes y herramientas

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.

Volver a la Guía

Inglés

Español

Traduciendo paso 5

Paso 5

If you are replacing the hard drive with a new drive, remove the four screws that mount the 3. drive to the carrier and mount the new drive in the carrier.

If you are replacing the hard drive with a new drive, remove the four screws that mount the 3. drive to the carrier and mount the new drive in the carrier.
Important: Hold the drive by its sides. Be careful not to touch the printed circuit board on the bottom of the drive.
Replacement Note: Slide the carrier and drive over the guides and into the drive bay, until you feel the drive snap into place.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.