Saltar al contenido principal
Inglés
Español
Paso 2
Locate the fourteen clips in the small gap that runs between the keyboard assembly and the chassis. Using a plastic opening tool, slowly press down the keyboard clips and begin pulling the keyboard upwards. This step requires a little bit of force. The clips are quite sturdy and can take a lot of pressure but the keyboard itself is still possible to bend or damage.
  • Locate the fourteen clips in the small gap that runs between the keyboard assembly and the chassis.

  • Using a plastic opening tool, slowly press down the keyboard clips and begin pulling the keyboard upwards.

  • This step requires a little bit of force. The clips are quite sturdy and can take a lot of pressure but the keyboard itself is still possible to bend or damage.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.