Saltar al contenido principal
Inglés
Español

Traduciendo paso 1

Paso 1
Locate all seven Phillips head screws around the borders of the plastic chassis. Locate the small Phillips head screw next to the wireless chip. Using a #00 Phillips head screwdriver, remove all eight screws listed above.
  • Locate all seven Phillips head screws around the borders of the plastic chassis.

  • Locate the small Phillips head screw next to the wireless chip.

  • Using a #00 Phillips head screwdriver, remove all eight screws listed above.

  • These screws are known to get stuck on occasion. If this occurs, try using a slower unscrewing motion with a magnetic screwdriver. Then, utilize the magnetism of the screwdriver to simply pull the screw from its "well".

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.