Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 8 guías que incluyen este paso.

Inglés
Chino
Paso 16
Use the flat end of a spudger to disconnect the headphone jack connector from the logic board. Pry up only on the connector—not on the socket itself. Newer iPad units have a loop of tape connecting this connector to its socket on the the logic board. This tape must be cut in order to disconnect the headphone jack.
  • Use the flat end of a spudger to disconnect the headphone jack connector from the logic board.

  • Pry up only on the connector—not on the socket itself.

  • Newer iPad units have a loop of tape connecting this connector to its socket on the the logic board. This tape must be cut in order to disconnect the headphone jack.

  • Fold the headphone jack cable out of the way.

用撬棒的平端将耳机插孔连接器从电路板上断开。

只撬开连接器,不在插座上。

新版的 iPad 设备有一圈胶带连接电路板上的插座。必须断开该胶带才能断开耳机插孔。

将耳机插孔电缆翻折起来。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.