Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.
Traduciendo paso 3
Paso 3


-
To release the logic board, push the large "OK" button located on the other side of the phone.
-
Before reassembly, make sure the keypad is lined up with the logic board.
-
Before reassembly, be sure camera lens is properly aligned at the top of the logic board and the volume controls are in place.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.