Saltar al contenido principal
Inglés
Español

Traduciendo paso 1

Paso 1
Locate and unscrew the four 8mm screws (in red) along the edge with a Phillips #1 screwdriver. Unscrew the two 12mm screws (in orange) on the inside of the daughterboard.
  • Locate and unscrew the four 8mm screws (in red) along the edge with a Phillips #1 screwdriver.

  • Unscrew the two 12mm screws (in orange) on the inside of the daughterboard.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.