Saltar al contenido principal
Inglés
Español
Paso 10
Lift the Wi-Fi board from its edge nearest the center of the DSi, and it comes right off the logic board. Use the flat end of a spudger to pry both antenna cable connectors from their respective sockets on the  Wi-Fi board and logic board. Use the flat end of a spudger to pry both antenna cable connectors from their respective sockets on the  Wi-Fi board and logic board.
  • Lift the Wi-Fi board from its edge nearest the center of the DSi, and it comes right off the logic board.

  • Use the flat end of a spudger to pry both antenna cable connectors from their respective sockets on the Wi-Fi board and logic board.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.