Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.

Inglés
Japonés
Paso 7
Apply a few drops of isopropyl alcohol (90% or greater) under the battery and let it flow around the adhesive to help weaken it. High concentration isopropyl alcohol acts as a solvent and dries without leaving any residue, so it will not hurt your iPhone. Carefully wedge a plastic card under the battery on the side nearest the logic board.
Battery removal with latent adhesive
  • Apply a few drops of isopropyl alcohol (90% or greater) under the battery and let it flow around the adhesive to help weaken it. High concentration isopropyl alcohol acts as a solvent and dries without leaving any residue, so it will not hurt your iPhone.

  • Carefully wedge a plastic card under the battery on the side nearest the logic board.

  • Do not pry against the logic board or you may damage the phone.

  • Avoid prying near the top edge of the battery, or you may damage the upper component ribbon cable.

  • Slide the card from the top of the battery to the bottom, pushing toward the edge of the case.

  • If necessary, repeat the same procedure with the case side of the battery.

ロジックボード側のバッテリー下にプラスチックカードの端を丁寧に差し込んでいきます。

ロジックボード側に向けてバッテリーを押し出さないでください。デバイスにダメージを与えてしまいます。

バッテリーの上部端付近にカードを差し込まないでください。上部コンポーネント用のリボンケーブルにダメージを与えてしまうことがあります。

バッテリーの上部から下部に向かってプラスチックカードをスライドし、背面ケースの端に向かって押し込みます。

それでも上手くいかない場合は、イソプロピルアルコール (90%以上) バッテリー底に注入し、流れ込ませて接着力を弱めます。高濃度のイソプロピルアルコールは溶解剤となり、接着剤を綺麗に乾かします。デバイスへのダメージもありません。

必要であれば、バッテリーのケース側でも同じ作業を繰り返してください。

[title] Battery removal with latent adhesive
[* black] Apply a few drops of isopropyl alcohol (90% or greater) under the battery and let it flow around the adhesive to help weaken it. High concentration isopropyl alcohol acts as a solvent and dries without leaving any residue, so it will not hurt your iPhone.
[* black] Carefully wedge a plastic card under the battery on the side nearest the logic board.
[* icon_caution] Do not pry against the logic board or you may damage the phone.
[* icon_caution] Avoid prying near the top edge of the battery, or you may damage the [guide|23004|upperhttps://d3nevzfk7ii3be.cloudfront.net/igi/QLdojmQyGXfKBBnF.full|upper component ribbon cable|stepid=60463|new_window=truecable|new_window=true].
[* icon_caution] Avoid prying near the top edge of the battery, or you may damage the [guide|23004|upperhttps://d3nevzfk7ii3be.cloudfront.net/igi/QLdojmQyGXfKBBnF.full|upper component ribbon cable|stepid=60463|new_window=truecable|new_window=true].
[* black] Slide the card from the top of the battery to the bottom, pushing toward the edge of the case.
[* icon_note] If you still trouble, apply some isopropyl alcohol (90% or greater) under the battery and let it flow around the adhesive to help weaken it. High concentration isopropyl alcohol acts as a solvent and dries without leaving any residue, so it will not hurt your iPhone.
[* icon_note] If necessary, repeat the same procedure with the case side of the battery.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.