Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.

Inglés
Italiano
Paso 7
Apply a few drops of isopropyl alcohol (90% or greater) under the battery and let it flow around the adhesive to help weaken it. High concentration isopropyl alcohol acts as a solvent and dries without leaving any residue, so it will not hurt your iPhone. Carefully wedge a plastic card under the battery on the side nearest the logic board.
Battery removal with latent adhesive
  • Apply a few drops of isopropyl alcohol (90% or greater) under the battery and let it flow around the adhesive to help weaken it. High concentration isopropyl alcohol acts as a solvent and dries without leaving any residue, so it will not hurt your iPhone.

  • Carefully wedge a plastic card under the battery on the side nearest the logic board.

  • Do not pry against the logic board or you may damage the phone.

  • Avoid prying near the top edge of the battery, or you may damage the upper component ribbon cable.

  • Slide the card from the top of the battery to the bottom, pushing toward the edge of the case.

  • If necessary, repeat the same procedure with the case side of the battery.

Inserisci con cautela una scheda di plastica sotto la batteria dal lato più vicino alla scheda madre.

Non far leva contro la scheda madre, potresti danneggiare il telefono.

Evita di far leva vicino al bordo superiore della batteria, potresti danneggiare il cavo piatto superiore.

Fai scorrere la scheda di plastica dalla parte superiore della batteria verso il basso, premendo verso il bordo del case.

Se hai ancora dei problemi, applica dell'alcol isopropilico (oltre il 90% di concentrazione) sotto la batteria e lascialo fluire sull'adesivo per indebolirlo. L'alcol isopropilico ad alta concentrazione funge da solvente e asciuga senza lasciare alcun residuo, quindi non danneggerà il tuo iPhone.

Se necessario, ripeti la stessa procedura dal lato opposto della batteria.

[title] Battery removal with latent adhesive
[* black] Apply a few drops of isopropyl alcohol (90% or greater) under the battery and let it flow around the adhesive to help weaken it. High concentration isopropyl alcohol acts as a solvent and dries without leaving any residue, so it will not hurt your iPhone.
[* black] Carefully wedge a plastic card under the battery on the side nearest the logic board.
[* icon_caution] Do not pry against the logic board or you may damage the phone.
[* icon_caution] Avoid prying near the top edge of the battery, or you may damage the [guide|23004|upperhttps://d3nevzfk7ii3be.cloudfront.net/igi/QLdojmQyGXfKBBnF.full|upper component ribbon cable|stepid=60463|new_window=truecable|new_window=true].
[* icon_caution] Avoid prying near the top edge of the battery, or you may damage the [guide|23004|upperhttps://d3nevzfk7ii3be.cloudfront.net/igi/QLdojmQyGXfKBBnF.full|upper component ribbon cable|stepid=60463|new_window=truecable|new_window=true].
[* black] Slide the card from the top of the battery to the bottom, pushing toward the edge of the case.
[* icon_note] If you still trouble, apply some isopropyl alcohol (90% or greater) under the battery and let it flow around the adhesive to help weaken it. High concentration isopropyl alcohol acts as a solvent and dries without leaving any residue, so it will not hurt your iPhone.
[* icon_note] If necessary, repeat the same procedure with the case side of the battery.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.