Saltar al contenido principal
Inglés
Español
Paso 18
Remove the two black 3 mm Phillips screws securing the logic board to the inner case. While holding the ground arm stationary with one hand, use a pair of tweezers to lift the ground spring off its plastic post on the inner case.
  • Remove the two black 3 mm Phillips screws securing the logic board to the inner case.

  • While holding the ground arm stationary with one hand, use a pair of tweezers to lift the ground spring off its plastic post on the inner case.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.