Saltar al contenido principal
Inglés
Español
Paso 13
Before removing the stylus holder, disconnect the power button and backlight connectors from the logic board. The connectors used on the Newton are very firmly seated in their sockets. To avoid shearing the socket off the board, work very slowly and use a combination of tweezers, the tip of a spudger, and your fingernails to remove the connectors.
  • Before removing the stylus holder, disconnect the power button and backlight connectors from the logic board.

  • The connectors used on the Newton are very firmly seated in their sockets. To avoid shearing the socket off the board, work very slowly and use a combination of tweezers, the tip of a spudger, and your fingernails to remove the connectors.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.