Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Inglés
Italiano

Traduciendo paso 5

Paso 5
Pull the tail end of the thread until both threads are equal in length. Holding both lengths of thread together, tie a knot near the end and pull it tight. This will trap the needle in the loop of thread and allow you to sew with doubled thread. If you prefer to sew with a single thread, tie a knot in only one of the threads, not both.
  • Pull the tail end of the thread until both threads are equal in length.

  • Holding both lengths of thread together, tie a knot near the end and pull it tight.

  • This will trap the needle in the loop of thread and allow you to sew with doubled thread. If you prefer to sew with a single thread, tie a knot in only one of the threads, not both.

Tirare il filo affinché le estremità abbiano la stessa lunghezza.

Tenendo entrambe le estremità insieme, fare un nodo stretto.

Questo imprigionerà l'ago nel cerchio così formato dal filo e permetterà di cucire a doppio filo. Se si preferisce cucire col filo singolo fare un nodo a solo uno dei fili e non entrambi.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.