Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Inglés
Español
Paso 2
Hold both the needle threader and needle in one hand, while keeping the loop of wire on the needle threader through the eye of the needle. Insert your thread through the loop of wire on the needle threader. Pull the thread through the loop so that you have a tail of least a few inches in length.
  • Hold both the needle threader and needle in one hand, while keeping the loop of wire on the needle threader through the eye of the needle.

  • Insert your thread through the loop of wire on the needle threader.

  • Pull the thread through the loop so that you have a tail of least a few inches in length.

Sujeta cuidadosamente el enhebrador y la aguja con una mano, manteniendo el alambre circular en posición.

Pasa el hilo que quieras usar a través del alambre circular del enhebrador.

Tira del hilo para dejar un excedente manejable de hilo en ambos lados (un par de pulgadas será suficiente)

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.