Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a la guía que incluye este paso.

Inglés
Español

Traduciendo paso 1

Paso 1
Once the charger connector is pulled out, proceed with removing the logic board. To remove the logic board, grip the four corners of the logic board and lift from the front inner case.
  • Once the charger connector is pulled out, proceed with removing the logic board.

  • To remove the logic board, grip the four corners of the logic board and lift from the front inner case.

  • Notice the second picture the logic board has been turned over with the button side facing up.

  • Note: Upon reassembly the logic board must be placed correctly. The button side with the various circles should face down, lining up with the circular holes on the inner case.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.