Repara tus cosas

Derecho a reparar

Tienda

Aviso: Estás editando un prerrequisito para la guía que estabas viendo hace poco. Cualquier cambio que realices afectará todas las 5 guías que incluyan este paso.

Volver a la Guía
Inglés
Español
Paso anterior

Traduciendo paso 2

Paso 2
To avoid damaging its socket, do not lift the end of the SSD above about 15˚. Lift the end of the SSD up slightly and pull it straight out of its socket on the logic board. When reinstalling the SSD, be sure it is properly seated before reinstalling its retaining screw.

  • To avoid damaging its socket, do not lift the end of the SSD above about 15˚.

  • Lift the end of the SSD up slightly and pull it straight out of its socket on the logic board.

  • When reinstalling the SSD, be sure it is properly seated before reinstalling its retaining screw.

Para evitar dañar su zócalo, no levantes el extremo del SSD en exceso.

Levanta ligeramente el extremo de la SSD y extráelo de su zócalo en la placa lógica.

Al reinstalar el SSD, asegúrate de que esté asentado correctamente antes de reinstalar su tornillo de retención.

[* icon_caution] To avoid damaging its socket, do not lift the end of the SSD excessivelyabove about 15˚.
[* icon_caution] To avoid damaging its socket, do not lift the end of the SSD excessivelyabove about 15˚.
[* black] Lift the end of the SSD up slightly and pull it straight out of its socket on the logic board.
[* icon_reminder] When reinstalling the SSD, be sure it is properly seated before reinstalling its retaining screw.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.