Saltar al contenido principal
Inglés
Español
Paso 4
If the fabric you’re repairing is gauzy or thin, you can add a small scrap of interfacing or scrap fabric on the backside of your rip or tear. Most of the time this isn’t necessary. Align the fabric in the sewing machine about half an inch before the rip or tear.
  • If the fabric you’re repairing is gauzy or thin, you can add a small scrap of interfacing or scrap fabric on the backside of your rip or tear. Most of the time this isn’t necessary.

  • Align the fabric in the sewing machine about half an inch before the rip or tear.

  • Lower the pressor foot and begin sewing, guiding the machine over the tear.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.