Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Inglés
Italiano
Paso 13
Turn the jacket right-side out again so you can see the original baffle stitching. Be sure to flip the bias tape out of the inside of the seam so it doesn't get caught as you continue to sew. Align your presser foot on top of the untouched, middle seam (between the two seams you've already sewed).
  • Turn the jacket right-side out again so you can see the original baffle stitching.

  • Be sure to flip the bias tape out of the inside of the seam so it doesn't get caught as you continue to sew.

  • Align your presser foot on top of the untouched, middle seam (between the two seams you've already sewed).

Girare la giacca al dritto in modo da poter vedere la cucitura originale del riquadro trapuntato. 

Assicurarsi di far passare il nastro sbieco al di fuori della parte da cucire, in modo che non resti cucito man mano che si procede. 

Allineare il piedino sopra la cucitura centrale ancora da ripassare (tra le due cuciture già fatte).

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.