Saltar al contenido principal
Inglés
Español

Traduciendo paso 1

Paso 1
Open the phone at a 90 degree angle.  This needs to be done in order to reach the screws. Locate the two 1.5mm #000 Phillips screws on the outside of each hinge. Remove the two 1.5mm #000 Phillips screws with a Phillips #000 screwdriver.
  • Open the phone at a 90 degree angle. This needs to be done in order to reach the screws.

  • Locate the two 1.5mm #000 Phillips screws on the outside of each hinge.

  • Remove the two 1.5mm #000 Phillips screws with a Phillips #000 screwdriver.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.