Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Inglés
Español

Traduciendo paso 4

Paso 4
This step requires extreme caution to avoid snapping off the small black clip highlighted in the picture. There is a small strip on the upper left of the screen that is connected to the logic board by a small black clip.  It is highlighted in the picture. Holding the screen and logic board together, use the plastic opening tool to push the clip into the up position as shown in the picture.
  • This step requires extreme caution to avoid snapping off the small black clip highlighted in the picture.

  • There is a small strip on the upper left of the screen that is connected to the logic board by a small black clip. It is highlighted in the picture.

  • Holding the screen and logic board together, use the plastic opening tool to push the clip into the up position as shown in the picture.

  • With the clip in the up position, remove the screen from the logic board.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.