Saltar al contenido principal
Inglés
Español
Paso 8
Reattach the strain relief. It needs to fit under the two lugs on the circuit board above the solder points for the braid and core.
  • Reattach the strain relief. It needs to fit under the two lugs on the circuit board above the solder points for the braid and core.

  • This is just visible on the left hand side of the core in the picture. The right hand tab is a bit short of the tab on the right because I didn't get the cable decently centred!

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.