Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.

Inglés
Español
Paso 2
Insert an opening pick under one of the corners of the NFC antenna and slowly slide it along the edge to cut through the black adhesive. While it is not imperative to keep the black adhesive layer intact, try to cut underneath it so that it comes off in one piece. While it is not imperative to keep the black adhesive layer intact, try to cut underneath it so that it comes off in one piece.
  • Insert an opening pick under one of the corners of the NFC antenna and slowly slide it along the edge to cut through the black adhesive.

  • While it is not imperative to keep the black adhesive layer intact, try to cut underneath it so that it comes off in one piece.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.