Saltar al contenido principal
Inglés
Chino
Paso 12
Remove these phillips screws: To remove all 6, you will need to slide the sliding assembly to get to the center two screws. Now, using a spudger, or  flathead screwdriver, seperate the two halves of the assembly, threading the data cable through it's hole.
  • Remove these phillips screws:

  • To remove all 6, you will need to slide the sliding assembly to get to the center two screws.

  • Now, using a spudger, or flathead screwdriver, seperate the two halves of the assembly, threading the data cable through it's hole.

  • This may take a little force since a mild adhesive is applied around the rim.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.