Saltar al contenido principal
Inglés
Español
Paso 4
Push the flat end of a spudger under the USB board to separate it from the display assembly. Insert the spudger at a shallow angle to avoid bending or damaging the USB board. Insert the spudger at a shallow angle to avoid bending or damaging the USB board.
  • Push the flat end of a spudger under the USB board to separate it from the display assembly.

  • Insert the spudger at a shallow angle to avoid bending or damaging the USB board.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.