Saltar al contenido principal
Inglés
Chino
Paso 5
The volume knob is simply pressed onto the splined volume control shaft. Use a plastic opening tool to pry evenly around the edge of the volume knob until you can remove it from the chumby.
  • The volume knob is simply pressed onto the splined volume control shaft.

  • Use a plastic opening tool to pry evenly around the edge of the volume knob until you can remove it from the chumby.

  • Volume control commands are sent via a rotary encoder that translates angular degrees of rotation into binary code recognized by the board.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.