Repara tus cosas

Derecho a reparar

Tienda

Volver a la Guía
Inglés
Español

Traduciendo paso 1

Paso 1
Rotate the assembly so that the green circuit board is facing you as shown in the first picture. Flip board over so it is oriented as shown in the second picture.

  • Rotate the assembly so that the green circuit board is facing you as shown in the first picture.

  • Flip board over so it is oriented as shown in the second picture.

  • Using a Phillips #1 Screwdriver, turn the small knob very slightly counter-clockwise—a few degrees to, at most, one-quarter turn.

  • You can find instructions for testing to make sure your repair worked at this link.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.