Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a la guía que incluye este paso.

Inglés
Español
Paso 4
Insert the plastic opening tool into the  center of the edge as shown in first picture. Slide the plastic opening tool along the central gap of device, making sure that each edge is free, as shown in the second picture. Slide the plastic opening tool along the central gap of device, making sure that each edge is free, as shown in the second picture.
  • Insert the plastic opening tool into the center of the edge as shown in first picture.

  • Slide the plastic opening tool along the central gap of device, making sure that each edge is free, as shown in the second picture.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.