Saltar al contenido principal
Inglés
Español
Paso 2
Remove 3 Phillips screws from the bottom of the power supply.  These hold together the upper and lower halves of the plastic power supply case. Remove 3 Phillips screws from the bottom of the power supply.  These hold together the upper and lower halves of the plastic power supply case.
Remove 3 Bottom Screws
  • Remove 3 Phillips screws from the bottom of the power supply. These hold together the upper and lower halves of the plastic power supply case.

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.