Saltar al contenido principal
Inglés
Español

Traduciendo paso 10

Paso 10
Using a Phillips #1 screwdriver, remove the six 3-mm screws from the sides of the screen. There should be three on each side. Using your hands, remove the two metal strips the screws were holding.
  • Using a Phillips #1 screwdriver, remove the six 3-mm screws from the sides of the screen. There should be three on each side.

  • Using your hands, remove the two metal strips the screws were holding.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.