Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.

Inglés
Español
Paso 9
Use a Phillips #00 screwdriver to remove the two 3-mm screws from the card connected to a black wire. These are not captive screws and, once loosened, will be free to move about the assembly. Be careful not to allow either fastener into the CPU fan and duct (located in the upper left).
  • Use a Phillips #00 screwdriver to remove the two 3-mm screws from the card connected to a black wire.

  • These are not captive screws and, once loosened, will be free to move about the assembly.

  • Be careful not to allow either fastener into the CPU fan and duct (located in the upper left).

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.