Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Inglés
Español
Paso 11
Start routing the SATA cable that you have already attached to the logic board up through the corner of the optical bay, following the existing wires. Make sure you have the cable all the way tucked in behind the connector before proceeding. See the first graphic as an example.
  • Start routing the SATA cable that you have already attached to the logic board up through the corner of the optical bay, following the existing wires.

  • Make sure you have the cable all the way tucked in behind the connector before proceeding. See the first graphic as an example.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.