Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Inglés
Español
Paso 21
Prying up the coils reveals the circuit board—alas, It's covered by a metal shield. With new iPhones on the horizon, there's no time for microsoldering today. We skip straight to the flush cutters to get through. The result isn't beautiful, but it's what we came for. The little circuit board houses a chip labeled STWPSPA1. This is likely a close cousin to STMicroelectronics' STWBC-EP, their 15 W wireless charger IC.
  • Prying up the coils reveals the circuit board—alas, It's covered by a metal shield.

  • With new iPhones on the horizon, there's no time for microsoldering today. We skip straight to the flush cutters to get through. The result isn't beautiful, but it's what we came for.

  • The little circuit board houses a chip labeled STWPSPA1. This is likely a close cousin to STMicroelectronics' STWBC-EP, their 15 W wireless charger IC.

Al levantar las bobinas se revela la placa de circuitos, que está cubierto por un escudo de metal.

Con los nuevos iPhones en el horizonte, no hay tiempo para microsoldar hoy. Saltamos directamente a los cortadores de la cisterna para atravesarlos. El resultado no es hermoso, pero es lo que vinimos a buscar.

La pequeña placa de circuito alberga un chip etiquetado como STWPSPA1. Este es probablemente un primo cercano del STWBC-EP de STMicroelectronics, su cargador inalámbrico IC de 15 W.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.