Saltar al contenido principal
Inglés
Japonés
Paso 19
Use a T8 Torx driver to remove the two remaining 5.0 mm hinge screws (one from each hinge). Remove the topmost screw last, using one hand to steady both halves of the MacBook Pro to make sure they don't separate and fall over unexpectedly. Remove the topmost screw last, using one hand to steady both halves of the MacBook Pro to make sure they don't separate and fall over unexpectedly.
Remove the remaining hinge screws
  • Use a T8 Torx driver to remove the two remaining 5.0 mm hinge screws (one from each hinge).

  • Remove the topmost screw last, using one hand to steady both halves of the MacBook Pro to make sure they don't separate and fall over unexpectedly.

T8トルクスドライバーを使って、残りの5.0mmヒンジネジを2本(両側から1本ずつ)取り出します。

最後に一番上のネジを外し、片手でMacBook Proの両方の半分を固定して、それらが分離した際に、アクシデントで倒れないようにします。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.