Saltar al contenido principal
Inglés
Japonés
Paso 13
Use a T8 Torx driver to remove two 5.0 mm screws from each hinge (four screws total). Each hinge has a third screw, which you should leave in place for now.
Remove some of the hinge screws
  • Use a T8 Torx driver to remove two 5.0 mm screws from each hinge (four screws total).

  • Each hinge has a third screw, which you should leave in place for now.

T8トルクスドライバーを使って、各ヒンジから5.0mmネジを2本ずつ(合計4本)外します。

各ヒンジには3番目のネジがあります。この時点ではこのネジを残しておきます。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.