Saltar al contenido principal
Inglés
Japonés
Paso 4
Use a T3 Torx driver to remove the four 2.0 mm screws from the hinge covers (two screws on each side). Use a T3 Torx driver to remove the four 2.0 mm screws from the hinge covers (two screws on each side).
Remove the hinge covers
  • Use a T3 Torx driver to remove the four 2.0 mm screws from the hinge covers (two screws on each side).

T3トルクスドライバーを使って、左右のヒンジカバーから2.0mmネジを4本(各2本ずつ)外します。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.