Saltar al contenido principal
Inglés
Alemán
Paso 4
Use a T3 Torx driver to remove the four 2.0 mm screws from the hinge covers (two screws on each side). Use a T3 Torx driver to remove the four 2.0 mm screws from the hinge covers (two screws on each side).
Remove the hinge covers
  • Use a T3 Torx driver to remove the four 2.0 mm screws from the hinge covers (two screws on each side).

Drehe die vier 2,0 mm Torx T3 Schrauben aus den Scharnierabdeckungen heraus (also zwei auf jeder Seite).

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.